0 members (),
18
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums23
Topics355
Posts4,527
Members404
|
Most Online248 Mar 14th, 2020
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
|
Joined: Jan 2019
Posts: 1,308 Likes: 53
MBN veteran
|
OP
MBN veteran
Joined: Jan 2019
Posts: 1,308 Likes: 53 |
I may have to contemplate replacing ALL the hoses on the mini hoe. . Bucket raised & line to bucket dump cylinder springs a leak. weight of the bucket emptied the cylinder via the leak. Tomorrow I'll mix up some degreaser.. Today I'm just over it... I did replace the hose with one I had to finish up the project. It's too long though will still need to replace it.
I know a lot about a lot of things BUT I still have a lot to learn. Life is what you make of it. So, why not make a working machine to make it easier.
|
|
|
|
Joined: Jan 2019
Posts: 768 Likes: 58
MBN old hand
|
MBN old hand
Joined: Jan 2019
Posts: 768 Likes: 58 |
from what Ive worked with,unless it's a large diameter hose, surplus center has some great deals on pre-fab hydraulic hoses..measure up what you need and go the website and see what they have in stock..usually have pretty good selection of lengths close to what you need..for my loader I have some hose slack coiled up and radius bent under the valve area and around the front axle area due to hoses that are too long.,no big deal..one hose I did have to shorten, I simply took it to the local New Holland dealer in town and they shortened it and re-crimped an end onto it..cost about the same as two more hoses from surpluscenter.I always get some spare fittings when I order from them,makes the UPS charge worth it to have stock in the shop for quickie repairs and to build with FWIW
|
|
|
|
Joined: Nov 2020
Posts: 53
MBN member
|
MBN member
Joined: Nov 2020
Posts: 53 |
I recently had one of those showers too. I tightened everything up where I thought it was all coming from, started it up and then found out where it was really coming from! A local NAPA has been making replacement hoses for me. Its about an hour round trip instead of waiting a week for somebody to ship it. while the new valve from Surplus Center has solved the problem of stalling the motor when I go to turn the Cadtrack, It now demonstrates something new when it refuses to change direction until the lever is pulled several times. I won't be doing any more business with them as they have assured me that the valve is working properly.....blah blah blah two sides to every story, blah blah some more. Drama. It does not work to my expectations...
|
|
|
|
Joined: Jan 2019
Posts: 1,413 Likes: 11
MBN veteran
|
MBN veteran
Joined: Jan 2019
Posts: 1,413 Likes: 11 |
Cold oil is bad---- hot oil is the kicker! ---- NOT good to get either on you! ---- Kinda like gittin hit by a skunk!
"A machine you build yourself is a vote for a different way of life. There are things you have to earn with your hands."
|
|
|
|
Joined: Jan 2019
Posts: 768 Likes: 58
MBN old hand
|
MBN old hand
Joined: Jan 2019
Posts: 768 Likes: 58 |
U sure thats the right replacement valve you ordered for the machine Kevin? a replumb of the whole machine might be in order if you can't make sense of the way it's plumbed now.. -hard to troubleshoot when gawd knows what the previous owner did to it..and we got snow on the way too
|
|
|
There are no members with birthdays on this day. |
|
|
|