Last year I swapped the tires from my SXS to the loader. The tires were too aggerssive for the SXS and I was afraid that I was going to break stuff. The loader had mud tires on it from my old silverado. Anyway the SXS tires are Outback Max and have very aggressive tread. They really changed how the machine works. It has great traction with the new tires. I am running them way above their stated pressure to handle the weight of the loader. Anyway the tires are apparently too aggressive / I was trying too hard to push a burn pile of trees together. I heard and felt a pop and knew I had broken something in the back.

I was still pulling with the front axle, but it was clanking. I managed to limp it back to the shop with just the front axle pulling. I then proceeded to plant the bucket in the ground and spin the tires trying to figure out what was wrong with the front. It was working wierd also. Anyway I heard another pop and broke the front also. At this point I don't have any motion from the axles. This was all about 2 months ago.

I finally got around to pulling it into the shop Friday. I used the tooth bucked to crab walk it into the shop. Them my tractor to finish pushing it in.

I'll post pics tomorrow


Machine Builders Facebook Page
https://www.facebook.com/groups/1153014311474457/

Report site issues on the FB page if you can't on the main site.