Got to work on the dozer a little tonight. Drained the radiator and pulled the front shroud. Little bugger is heavy.

On the back of the engine the hydraulic pump is direct mounted to it and passes the drive shaft through to a output drive shaft going into the transmission. The transmission is supported by the engine so I am going to pull it with the engine then try to take it apart once I have it on the floor or a stand.

I have been looking for rebuild kits and a cam shaft, I have found the rebuild kit but the cam shaft may hurt the pocketbook...

[Linked Image from live.staticflickr.com]

Machine Builders Facebook Page
https://www.facebook.com/groups/1153014311474457/

Report site issues on the FB page if you can't on the main site.