Spent over 2 hours designing the stand, table, motors mounts, shaft mounts, etc today.
I use my cad program for my plasma table to design with.
I set the overall size I want, then place the items that I know the size of, in the drawings.
Once I get all the items/parts draw and scaled out, all I have to do is measure each part to get the cut list.
Couple of clicks and push one key and it tells me the length of the part.
ex. The legs from the base to the table top need to be 27 5/8" long.
That is if I use a 1/2" thick top, but I may use a 3/8" tick top and that will make the legs 27 3/4" long.
I can also add text to the drawings and print them out, to use as blue prints in the shop.
