I have two flows, just the same as Gator's machine, one flow is propel thru a standard 4way cylinder valve and one other flow does the steer with power beyond for the loader..Im so used to running it now I really dont notice the loader not moving when steering like when moving snow,lifting and turning..I can turn and use the loader by 'jabbing' the steer valve to steer in short movements..I just concentrate on the loader movements and steering as necessary..I dont have room for a flow divider in my chassis as its very tight already..I was looking for a 3section pump but that goes to a whole new level of expense..so I keep what I have-it works.FWIW I had the Brand Hydraulics motor valve on my machine fro the propel circuit but broke it permanently so I went back to a standard cylinder valve..
