I had built/rebuilt this press. I built the frame probably when I was 17 or 18. It used a 20 ton bottle jack which was complete pain in the ass but worked marginally satisfactory for 20 some odd years. I bought the 4 3/4 bore cylinder at a swap meet for little nothing. Motor came from something I scraped. I bought new pump for everyone's favorite place surplus center. I had a little bigger pump on it but it stall the motor out buy the time it build pressure. I dont remember the displacement off the new one...its small. Right pressure relief is set at 1500 pissys; and that's about all it will suffer for now till I get bigger table pins and add to the top. 14 ton at the moment. Want to hit 18 ton
