I joined a FB group for the welder I have. I posted about how to hook it up with the welder. One of the guys suggested making another tank for the cooler. The lid doesn't really seal. I think I'm going to make a small replacement tank for it.
I did plug it in and hit the switch for a blip. The pump spun but made a not great noise. I didn't rund it but about a 1/4 second. I'll probally clean the tank and see if it will pump before I decide to go too far with it. I'll try to rebuild it if it is messed up. I have a lot going on other than building stuff at the moment. I hope to get to it in the near future.
