I have dug deeper into the strut support, it turns out the crack in the fiberglass was allowing water to seep into the hull around the strut. I decided to cut all the old stuff out down to the hull and start over. Here is where it sits now before starting to rebuild it. I'm waiting on epoxy resin to come in to get back to work on it.

before that here is the ground out bottom side that will be patched up
[Linked Image from live.staticflickr.com]

Inside the boat initial removal of inside support

[Linked Image from live.staticflickr.com]

After deciding I needed to cut a little deeper, kind of looks like a transformer

Hidden carnage

[url=https://flic.kr/p/2g4fQUg][Linked Image from live.staticflickr.com]

After cleanup, still more cleanup to do to get down to solid glass

[url=https://flic.kr/p/2g4fZJD][Linked Image from live.staticflickr.com]

Last edited by GatorS; 05/30/2019 11:34 PM.
Machine Builders Facebook Page
https://www.facebook.com/groups/1153014311474457/

Report site issues on the FB page if you can't on the main site.